Description
Engineering Dynamics supply Aluminium Channel sections extruded (in Australia) to suit various isolation and support systems for concrete pools and other structures such as plant room isolated floors where galvanised or mild steel support beams are deemed to be unsuitable.
CHARACTERISTICS
Material Properties available:
6060 T6 – Architectural Alloy
Heat treatable for strength, corrosion resistant, good surface finish for anodising and paint coatings.
6061 T6 – Structural Alloy
High strength, corrosion resistant, higher welded properties to architectural range.
6082 – T5 Structural Corrosion Resistant
High strength, corrosion resistant, higher welded properties to architectural range.
6000 Series Magnesium and Silicon
Most popular extrusion alloy class and exhibit the following:
-
- Good strength
- Good corrosion resistance
- Good machinability
- Good weldability
- Good formability
- Heat treatable
PHYSICAL PROPERTIES
Channel Sizing and deflection under load are calculated to suit each application.
PROFILE SIZES AVAILABLE
(Some sizes are not stocked and are only available as mill run)
100 mm(W) x 45mm (H) x 4.9 mm (TH)
| 60 mm(W) x 32mm (H) x 4.0 mm (TH) |
| 80 mm(W) x 40mm (H) x 4.0 mm (TH) |
| 127mm (W) x 50.8 mm (H) x 4.0mm (TH) |
| 150 mm(W) x 50mm (H) x 5.0 mm (TH) |
