• Solutions For Structural Vibration Isolation and Manufacturing Services

Eddor Isolation Pad

EDDOR Pads are black rubber elastomer pads produced from controlled hardness profiled (ribbed) sheet.

Categories: ,

Product description

EDDOR Pads are black rubber elastomer pads produced from controlled hardness profiled (ribbed) sheet.

Size and hardness of each pad is designed specifically to meet requirements of isolation and natural frequency.

Two Different Grades of elastomer are available, EPDM or alternatively Natural Rubber 9mm for loads 0 kPa – 650 kPA.

APPLICATION

Where a low cost pad is required for effective isolation of structure borne vibration, and structural connections.

Pads may be layered in 2, 3 or 4 layers with Stainless Steel or Aluminium Shims between layers.

CHARACTERISTICS
Specific Gravity 0.93-0.95
Colour Black
Compression Recovery 90% min at 1 hour
Damping Coefficient 0.13
Thermal Conductivity 0.15 W.m-1.K-1 approx
Service Temperature Min -18c / Max 100c
Tensile Strength 20 MPa
Ultimate Tensile Strain 6%
Tear Strength 35 kN/m
Maximum Shear Displacement 2.5mm
Compression Set 25% of less
Dielectric Constant 15
Chemical Resistance Resistant to attack by most common reagents. Refer to Engineering Dynamics for details.
It should not be used in application which are exposed to hydrocarbon solvents, fuels and oils, or strong oxidants.
DOWNLOADS