ED1151H Isolation Hangers have been specifically designed to provide efficient isolation of equipment and concrete structures from vibration sources including (but not
necessarily limited to) Piping Ductwork, Fans, Packaged Air Conditioners, Suspended Ceilings, Barrier Ceilings and below plant room floors.
The material used in the manufacture of these isolators is low dynamic stiffness natural rubber compound similar to that used in bridge bearing manufacture.
The housing is made from Galvanised Steel Material conforming with AS 1397 G2 – Z275.
|Rubber Isolator:||Made of Natural Rubber|
|Typical Deflection:||0.5mm – 12mm per isolator|
|Thermal Conductivity:||0.15 W.m-1.K-1 approx|
|Service Temperature:||Min. -15 Degrees / Max. 80 Degrees C|
|PART NO.||ISOLATOR HARDNESS||LOADS (KG)||DEFLECTION (MM)||DYNAMIC FACTOR|