Description
ED1151, ED1152 and ED1153 Rubber Mounts Vibration Isolators have been specifically designed to provide efficient isolation of equipment and concrete structures from vibration sources
including (but not necessarily limited to Pumps, Compressors, Chillers, Power Generation Equipment, Cooling towers, and plant room floors.
The material used in the manufacture of these isolators is low dynamic stiffness natural rubber compound similar to that used in bridge bearing manufacture.
Short Term loads of up to 12% above tabulated loads can be accommodated without permanent damage to isolators.
Made of Natural Rubber.
CHARACTERISTICS
| Typical Deflection | 0.5mm- 12mm per isolator |
| Typical Damping | 6% |
| Thermal Conductivity | 0.15 W.m-1.K-1 approx |
| Service Temperature | Min -15c / Max 80c |
