The Damped Spring Isolator has been specifically designed to minimise the transfer of shock and vibration from plant and equipment which requires a high levels of
Vibration Isolation. All Isolators are Factory Tested for compressive load vs. deflection and vibration performance.
For use under equipment lightweight and concrete floating floors where control of damping rate is required.
Full system including support beams, insulation, structural design and supervision of or supply of installation is typically provided.
|Typical Deflection||40 – 50mm|
|Typical Damping||Variable 3%-15%|
|Thermal Conductivity||0.15 W.m-1.K-1 approx|
|Service Temperature||Min. -18c / Max. 100c|
Engineering Dynamics damped spring isolators incorporate thick steel baseplates and metallic holding rings for retaining the coil springs at loads up to 50% vertical (in the horizontal direction).
Varying hardness, low dynamic stiffness elastomers are used for the damping and top and bottom components for superior reduction of vibration transfer through spring.
Coil Springs and Housings are Hot Dip Galvanised for long lifetimes. A combination of viscous and fluid damping is utilised to provide superior control of damping properties.