EDDOR Pads are black rubber elastomer pads produced from controlled hardness profiled (ribbed) sheet.
Size and hardness of each pad is designed specifically to meet requirements of isolation and natural frequency.
Two Different Grades of elastomer are available, EPDM or alternatively Natural Rubber 9mm for loads 0 kPa – 650 kPA.
Where a low cost pad is required for effective isolation of structure borne vibration, and structural connections.
Pads may be layered in 2, 3 or 4 layers with Stainless Steel or Aluminium Shims between layers.
|Compression Recovery||90% min at 1 hour|
|Thermal Conductivity||0.15 W.m-1.K-1 approx|
|Service Temperature||Min -18c / Max 100c|
|Tensile Strength||20 MPa|
|Ultimate Tensile Strain||6%|
|Tear Strength||35 kN/m|
|Maximum Shear Displacement||2.5mm|
|Compression Set||25% of less|
|Chemical Resistance||Resistant to attack by most common reagents. Refer to Engineering Dynamics for details.
It should not be used in application which are exposed to hydrocarbon solvents, fuels and oils, or strong oxidants.